Skip to content

Editing a floor

Engineering access required

Editing a floor needs engineering access with Engineering Mode switched on.

Open the floor (see Viewing the twin) and click Edit layout. The floor's menu becomes the palette, from the top: Walls and partitions, Rooms, Furniture, Floor markings, Zones, then Equipment. The Equipment list is searchable. It starts with the items Not linked yet and the Machines not in the twin yet, then every type of equipment, grouped into production machines, material handling, utilities and so on.

The palette scrolls. Click a section's name to fold it away, and again to open it. The palette remembers which sections you folded. The minimise button at the top folds the whole palette to a strip, so the 3D view gets the full width.

The bar above the 3D view shows what to do next, the number of unsaved changes, and the Undo, Redo, Discard changes, Save and Done buttons.

Placing equipment

  1. Pick a piece of equipment from the palette. It follows the pointer over the floor.
  2. Click on the floor to place it. Press Esc to stop placing.

New equipment is named after its type — "CNC milling machine 1", "CNC milling machine 2" and so on — and starts as not linked to a machine.

The CNC machines group has a shape for each common kind of machine tool: milling, turning, grinding, plasma cutting, laser cutting, router, wire EDM and press brake.

For server rooms and laboratories there are a Server rack row (in the electrical group — make it wider for more racks; there is one rack every 0.6 m), a Precision air conditioner and a Fume hood (in the utilities group).

The grid

The Grid setting on the editing bar sets the steps that positions snap to: Off, 0.25 m, 0.5 m (the start) or 1 m. Hold Alt while dragging to place something freely, off the grid. Your browser remembers the setting.

Moving and rotating

  • Drag an item to move it. It stays inside the floor.
  • Press R to rotate the selected item, Shift + R to rotate it the other way.
  • Use the arrow keys to nudge the selected item (Shift for bigger steps).
  • Hold Alt while dragging to place it off the grid.

Zones

Zones mark parts of the floor — a Production line, a Cell, an Area or an Aisle — and show their names on the floor. A zone only marks the floor: the machines in it stay where they are.

  1. Under Zones in the palette, pick the type of zone.
  2. Drag on the floor to draw it, or click once for a standard size. Press Esc to cancel.

Select a zone by clicking it. Its card sets the Name, the Zone type and the Size (m) (Width and Depth), and has Delete. Drag a zone to move it; it stays inside the floor. The arrow keys nudge it.

Walls and partitions

A floor is rarely one open hall. Use Walls and partitions at the top of the palette to divide it into offices, cabins, meeting rooms, washrooms and open-plan desk areas.

Type What it is
Drywall A plain painted wall, up to the ceiling
Block wall A thicker masonry wall, up to the ceiling
Glass partition Clear glazing in slim frames, up to the ceiling
Glass on a solid base A solid lower part with glass above, up to the ceiling
Cubicle screen A low fabric screen between desks (1.4 m)
Toilet cubicles Cubicle panels standing a little off the floor (2 m)

To draw them:

  1. Pick a type under Walls and partitions.
  2. Click where the wall starts, then where it ends.
  3. Keep clicking to draw the next wall from there — for example round the four sides of an office. Double-click to finish the run and start a new one somewhere else.
  4. Press Esc to stop drawing.

While you draw:

  • Walls run straight along the floor's sides. Hold Alt for any angle.
  • A click close to the end of another wall joins the two. A click close to an outside wall lands on it.
  • Points follow The grid setting.

To add doors, press Esc to stop drawing, then click a wall to select it. Its card opens (see The wall card below), and doors are added there. Drag a selected wall to move it, or use the arrow keys. R turns it.

The wall card

Field What it changes
Type What the wall is made of. Its length and doors stay
Length (m) / Height (m) Its size
Full height Drywall, block and glass walls reach the floor's ceiling. They keep reaching it if the floor's height is changed. Switch it off to give the wall its own height
Rotation Turn it with Rotate left / Rotate right, or type an angle
Doors Add a door puts one in a free spot. For each door choose Door, Double door, Glass door or Opening (no door), then set its Width (m) and how far it is From the start (m). The start is the end you began drawing from
Left / Right Which side the hinges are on
Open to the other side Which way the door swings
Duplicate / Delete A copy next to it / remove it (or press Delete)

Each door's swing is drawn on the floor, as on a floor plan.

Walls, partitions, rooms, furniture and floor markings are only drawn in the floor view for now. From the site view, an entered building shows its outside walls only.

Rooms

A room is four walls with a door, a name and a type, which move, turn and resize together. Use rooms for offices, cabins, meeting rooms, washrooms, server rooms, hostel rooms, classrooms and so on.

Type Usual walls and door
Office, Meeting room Glass partition, a glass door
Cabin Glass on a solid base, a door
Washroom, Hostel room Block wall, a door
Server room Block wall, a double door
Store room, Classroom Drywall, a door
Lab Drywall, a double door
Pantry Drywall, an opening (no door)

To draw one:

  1. Under Rooms in the palette, pick the type of room.
  2. Drag on the floor to draw it, or click once for its standard size. Press Esc to cancel.

The new room is named after its type ("Office 1", "Office 2", …) and its card opens. Its first door goes on the side facing the middle of the floor, where the corridor usually is.

A side of the room that runs along the building's outside wall gets no wall of its own: the building's wall is used. So a room drawn into a corner of the floor only gets its two inner walls.

Select a room by clicking one of its walls. Drag it to move it, or use the arrow keys. R turns it.

The room card

Field What it changes
Name The name shown on the floor
Room type What the room is. If its walls are still the type's usual ones, they change to the new type's walls
Walls What the walls are made of (the same choices as Walls and partitions)
Size (m) Width, Depth and Height
Full height The walls reach the floor's ceiling, and keep reaching it if the floor's height is changed. Switch it off to give them their own height
Rotation Turn it with Rotate left / Rotate right, or type an angle
Doors Add a door, then click on one of the room's walls: the door goes where you clicked. Each door shows which wall it is on, and has its type, Width (m) and From the corner (m), measured from the corner before it, going round the room
Left / Right Which side the hinges are on
Open to the other side Doors open into the room. This makes one open outwards
Duplicate Places a copy right beside it, wall to wall. Duplicate again to make a row of cabins or hostel rooms
Delete Removes it (or press Delete)

Furniture

Furniture shows what offices, hostels, washrooms, classrooms and labs look like inside. It is only for the look of the floor: it is never linked to a machine and shows no status.

Set What it draws Its numbers
Desk cluster Desks back to back with a monitor, keyboard, PC and chair each, a low screen between the rows Rows, Desks per row
Meeting table A table with chairs on both sides Seats
Reception desk A counter with desks and chairs behind it Width (m)
Hostel room set A bed, a study desk with a chair and a wardrobe for each person Beds
Toilet cubicles A row of WC cubicles with doors, and a counter of wash basins with a mirror WC cubicles, Wash basins (0 = none)
Classroom desks Rows of student desks and chairs facing a teacher's desk and a board Rows, Desks per row
Lab benches Island benches with a sink and reagent shelves, stools on both sides Benches, Length (m)
Shelving Rows of shelving with boxes on the shelves Rows, Length (m), Height (m)
Pantry A counter with a sink and microwave, a fridge, and a table with four chairs Length (m)

To place a set:

  1. Under Furniture in the palette, pick the set.
  2. Move the pointer over the floor: the set follows it and always stays inside the floor. Click to put it down. Press Esc to cancel.

The set is placed with its usual numbers and its card opens. Click any piece of a set to select the whole set. Drag it to move it, or use the arrow keys. R turns it.

The furniture card shows the set's numbers (change one and press Enter), Rotation, Duplicate (places a copy beside it, so you can fill a large office with clusters) and Delete.

Furniture does not stop at walls: place it inside a room, then turn and size it to fit.

Floor markings

Floor markings are the paint on the floor: aisle lines, walkways, hatching, crossings, bays, arrows and words on the floor. Like furniture, they only show what the floor looks like.

Marking What it looks like How you draw it
Aisle line A solid yellow line Click by click, like walls
Dashed line A dashed yellow line Click by click
White line A solid white line Click by click
Hazard tape Yellow and black tape Click by click
Walkway A green walkway, 1.2 m wide, with white edges Click by click
Keep-clear hatching A yellow outline with diagonal stripes, for areas that must stay clear (in front of panels, fire exits) Drag a rectangle, or click for its usual size
No-go area The same in red Drag, or click
Pedestrian crossing White zebra stripes Drag, or click
Parking / pallet bay A yellow outline Drag, or click
Direction arrow A white arrow Move it over the floor and click to put it down
Floor text Words painted on the floor, such as KEEP CLEAR, FORKLIFT ONLY or a bay number Move it over the floor and click to put it down, then type your own words in its card

Lines are drawn like walls: click where the line starts, then where it ends. Keep clicking to go on from there, and double-click to finish. Lines run straight and join at their ends (hold Alt for any angle). Press Esc to stop.

Click a marking to select it. Drag it to move it, or use the arrow keys. R turns it. Its card has:

Field What it changes
Marking type Another marking of the same kind: a line can become another line, an area another area
Length (m) / Width (m) A line's length and how wide its paint is
Width (m) / Depth (m) An area's size
Length (m) An arrow's length
Text The words of a floor text (up to 60 characters, in any language). The change shows when you press Enter or leave the field
Letter height (m) / Colour How tall a floor text's letters are, and whether they are white or yellow
Rotation Turn it with Rotate left / Rotate right, or type an angle
Duplicate / Delete Copy it, or remove it (or press Delete)

Markings lie on top of zones, so you can paint lines and walkways through them.

While you are placing equipment or furniture, drawing a zone, a room, walls or floor markings, or adding a door to a room, a click only places it — clicking on top of a zone puts the equipment inside that zone. Press Esc first if you want to select the zone instead.

Linking equipment to machines

Equipment shows its machine's name and live status once it is linked to the machine.

Link an item you have placed:

  1. Select it. You can also pick it under Not linked yet at the top of the equipment list.
  2. In its card, open Machine and choose the machine. Machines whose type matches the item's shape are listed first, marked Suggested.
  3. Press Save.

Place a machine that is not in the twin yet: pick it under Machines not in the twin yet at the top of the equipment list, then click on the floor. It is placed already linked, in the usual shape for its type.

Unlink: press the unlink button next to Machine. The item stays, under the machine's name.

Good to know:

  • A machine stands in one place only. Choosing a machine that another item on this floor has moves it here (the list says Moves here from …); the other item stays, not linked, under the machine's name.
  • Machines placed on another floor, outdoors or at another location are not listed. Unlink them there first.
  • Links are saved with the layout, and Undo, Redo and Discard changes work on them like on any other change.
  • Transmission towers, overhead lines and storage racks are left out of Not linked yet, because they are often not machines. You can still link one from its card.

The item card

Select an item to open its card:

Field What it changes
Machine The machine it stands for (see Linking equipment to machines above)
Name The item's own name. A linked item uses its machine's name
Shape The type of equipment it is drawn as
Size (m) Width, Depth and Height
Rotation Turn it with Rotate left / Rotate right, or type an angle
Colour Its own colour, or Default colour (the usual colour for that kind of equipment — for example, grey for machine tools, blue for pumps and compressors, orange for robots)
Duplicate Places a copy next to it. A copy of a linked machine is not linked — a machine can stand in only one place
Delete Removes it (or press Delete)

Fields apply when you press Enter or click away, and each change can be undone.

Undo, save and leave

Keys / button What it does
Undo / Ctrl + Z Undo the last change
Redo / Ctrl + Y Redo it
Discard changes Go back to the last saved floor
Save Save every change at once
Done Leave the editor
  • Leaving the floor — Exit building, the breadcrumb, another floor, Done — with unsaved changes asks before discarding them. So does closing the browser tab.
  • If someone else saved the layout while you were editing, saving is refused and a message offers Reload. Reloading shows their version; your unsaved changes are lost.

The view stays where it is when you save.